Double Sensor Metal Detectors are designed and manufactured to detect metals that may be found in the material passing over the belt and damage the machines in the process, by attaching to the bottom and top of the conveyor belt, and to give audible and light warnings. It can give a signal that will trigger another movement when desired. They are more sensitive than single-sensor metal detectors and are used in places where the height of the material on the band is more than 15 cm. The higher the sensor range, the lower the detection sensitivity, and the lower the range, the higher the sensitivity.<\/p>\n
Technical Features :<\/p>\n
*2 x 1 mm LIYCY cable, LCD digital display, Sensitivity adjustment by giving numerical value, Waiting and delay time, Automatic and manual reset setting, 2 metal relays and 1 fault relay, Noise setting, Product reset and counting, Before or after rivet sensor connection feature<\/p>\n
*Warning relay : 6 Amp Changeover Fault relay : 6 Amp Changeover. Panel : IP 65<\/p>\n
*Metal dimensions to be detected: \u2265 30 mm Ambient operating temperature: -20 \u00baC \/ +40 \u00baC<\/p>\n
*Voltage: 220\u00b110% 50Hz Recommended Feed Belt Speed: 1.49 -1.07 m\/s<\/p>\n
Advantages:<\/p>\n
*They are more sensitive than single-sensor metal detectors.<\/p>\n
*Detection sensitivity adjustable<\/p>\n
*The metal detector control panel has a digital display and the adjustment operations are made by giving a numerical value.<\/p>\n
*There is an interference setting menu against negativities such as interference, false alarm, ground and radio signal.<\/p>\n
*It is easy to install and does not require structural changes in the carrier system.<\/p>\n
*The metal detector warning and warning system is audible or illuminated and does not require a separate connection.<\/p>\n
*It can be used easily on tapes attached with metal fastener (rivets). Rivet sensor connection is standard and can be retrofitted<\/p>\n
*Product rejection system connection and faulty product counting-reset are available.<\/p>\n
Please contact for more information.<\/p>\n","protected":false},"excerpt":{"rendered":"
Double Sensor Metal Detectors are designed and manufactured to detect metals that may be found in the material passing over the belt and damage the machines in the process, by attaching to the bottom and top of the conveyor belt, and to give audible and light warnings.<\/p>\n","protected":false},"featured_media":7136,"template":"","meta":[],"product_cat":[162],"product_tag":[],"class_list":["post-7306","product","type-product","status-publish","has-post-thumbnail","hentry","product_cat-metal-detectors"],"acf":[],"yoast_head":"\n